|
| |
III. STRUCTURAL LIGHTNING PROTECTION PRODUCTS
To view the Spec Sheets you need Adobe Acrobat
Reader.
It is a FREE PDF Reader - Click the Get Adobe Reader icon
to obtain the reader.
 |
|
Part Number |
Description |
|
PP-1 SERIES |
LM-PP-1
Click Here For Spec Sheet |
APPLICATION:
Dissipators can be mounted in a various number of ways including 1/4"
bolts, self tapping screws, or mounted to a pipe to use as a height
extension.
DESCRIPTION: Multipurpose spot
dissipator that can be used on just
about anything including handrails, storage tanks, signs, lighting poles,
etc. One mounting hole. Recommended spacing is from 10 to 15 feet with a max.
of 20 feet. 3/8" tube type 316 S.S.
WEIGHT: 1.5 oz.
NOTE: Available with 3/8" hole. |
LM-PP-2
Click Here For Spec Sheet |
APPLICATION:
Dissipators can be mounted in a various number of ways including 1/4"
bolts, self tapping screws, or mounted to a pipe to use as a height extension. DESCRIPTION: Similar to PP-1
dissipator except with two mounting holes
for vertical rigidity. Can be used for sheds, metal buildings, metal
equipment shelters, etc. 3/8" tube type 316 S.S.
WEIGHT: 1.5 oz. |
LM-PP-1-HRBC-72
Click Here For Spec Sheet |
APPLICATION: Any
location where elevation above protected structure is desired.
DESCRIPTION: Stainless Steel angle adapter, length of all-thread sufficient to allow 4"
clearance from handrail, 3/4" acorn clamp for ground connection, 72
overall length of 3/8" schedule 40 type 316 S.S. pipe, with PP-1
Dissipator.
NOTE: 5/8" rod,
1/2" thread |
|
|
|
